Universal Samsung FRP Bypass

by

Universal Samsung FRP Bypass

nexus2cee_frp (1)

Here are the steps to remove factory reset protection / Google previously synced account lock from your Samsung device.

  1. Download and install RealTerm program
  2. Download and copy com.rootjunky.frpbypass-1.0.apk to the device micro sdcard or download once into the device
  3. start phone and connect to WIFI plug into the computer with your usb cable
  4. start RealTerm on your pc and under the box check the box HALF DUPLEX
  5. right click on my computer and select manage once it opens click device manager then modems
  6. Under modems you should see a Samsung device. right click it then select properties
  7. once the properties window opens select modem tab and see what port it is on com5 for an example
  8. windows and open RealTerm again
  9. under the ports tab in RealTerm enter your port number then click change.
  10. next click the send tab. you want to send two commands with the Send ASCII button
  11. first at + creg? \ r \ n
  12. then atd1234; \ r \ n
  13. look at your phone and the dailer wants to pop up.
  14. Know the success of your or failures. thanks

NOTE: If you do not have a SDcard and are getting the sparse ERROR in it file explorer then you can buy a OTG flash drive like this one and load the FRPbypass.apk to it from your computer. once plugged in navigate to it in file explorer and install the frp bypass app that way. So you can put this address into your ES file explorer app  https://www.androidfilehost.com/?fid=24665542585483676

 

Alternative Samsung Frp bypass Method 

All of the latest FRP bypass methods and remove can be found at Phonlabtech.com. RootJunky has created this training course and you will find all of the best methods available in his training course. Watch the video below and you will see motoReaper a tool that rootjunky created for phonlabtech students to use on Motorola devices.

 

 

If you are looking for more FRP Bypass methods make sure you check out Phonlab. All of my latest research on FRP is going to be exclussively on Phonlab along with Samsung Reactivation lock bypass and so much more. Check it out !!!!

Quadrooter Qualcomm Exploit
R1 HD Amazon Bootloader unlock

Super Fans always leave a comment :-)

520 thoughts on “Universal Samsung FRP Bypass”

  2. Hopefully you will see this, rootjunky, and hopefully you will respond since many other people have had this issue, but upon entering the second command, atd1234;\r\n, it comes up with ok, followed by an error message.

    Will look forward to your response!

    Reply

    • I had this issue as well. Using atd+1234;\r\n worked. However, the phone dialer would only pop up after I had inserted a SIM card.

      I also messed around with sending a text message, which I think helped the dialer pop up:

      at+cmgs=”+”\r, Send ASCII (where is a full number including country code and area code)
      Type message, Send ASCII
      26, Send Numbers

      Reply

  3. Awesome, i try first method and few other methods too. In a bit i start thinking it’s a joke but finally i realize that my damn galaxy s7 edge have the latest security updates. So the second video do the trick and the important thing was to downgrade the google account manager, which bypass this dumb feature!! I forgot what account and password have been used on my device, then i sold it and realize that the new owner will just stuck after factory reset. Anyway now I am in the phone and will send it back to the new owner. Thanks again it worked by the second video, only i use the realterm to dial a number and open chrome. Important thing is that you should dial a number with sim card and the other site must pickup so you have the option to slide left and open the “internet”. Thanks Man!

    Reply

    • Still having trouble here myself. Not sure how to downgrade the google account manager in order to progress with the video/rest of the steps. Would you mind telling how you achieved that? Much appreciated ahead of time.

      Reply

      • Follow the steps in the video but when you put the “com.rootjunky.frpbypass-1.0.apk” on the SD card be sure to download “Android_6_Google_Account_Manager.apk” as well. Store it in the same location as the frpbypass apk. Then when you get to the point of installing you need to install the account manager apk FIRST and then the frpbypass. I JUST did this and it worked. I was having the “Unfortunately, FRP bypass has stopped working” error and this fixed it. I am on a SM-G930a with Lollipop 6.0.1 with Nov 1st 2016 security patch.

        Reply

  4. For those guys looking for august–October patch solution, Samsung disabled one of the google account login,which the way we used to go after frp apk installed.
    So, simply install the “Android_6_Google_Account_Manager.apk” from rootjunky website then use frp1.0. apk, magic comes back!!

    Tested with G928W8 6.0.1 MMB29K October.1 patch

    Reply

    • Would you mind walking me through how you achieved that ? With the new update its seemingly impossible to get into the phone to install the apks. Dont know if im missing something. Any help is appreciated.

      Reply

  8. bonsoir j ai bien suivi votre tutto
    mais je ne sais plus continuer car sa me marque frp bypass s est arreter
    j ai un samsung s7 edge
    merci pour votre reponse

    Reply

  10. Thanks for sharing this method. At first, its totally hard to find out but when you recall the step, i figure out that this is so easy. Thanks, now i can use again my samsung s7 edge. Thanks…. Keep up the good work… 🙂

    Reply

Leave a Comment

Loading Facebook Comments ...