Universal Samsung FRP Bypass

by

Universal Samsung FRP Bypass

nexus2cee_frp (1)

Here are the steps to remove factory reset protection / Google previously synced account lock from your Samsung device.

  1. Download and install RealTerm program
  2. Download and copy com.rootjunky.frpbypass-1.0.apk to the device micro sdcard or download once into the device
  3. start phone and connect to WIFI plug into the computer with your usb cable
  4. start RealTerm on your pc and under the box check the box HALF DUPLEX
  5. right click on my computer and select manage once it opens click device manager then modems
  6. Under modems you should see a Samsung device. right click it then select properties
  7. once the properties window opens select modem tab and see what port it is on com5 for an example
  8. windows and open RealTerm again
  9. under the ports tab in RealTerm enter your port number then click change.
  10. next click the send tab. you want to send two commands with the Send ASCII button
  11. first at + creg? \ r \ n
  12. then atd1234; \ r \ n
  13. look at your phone and the dailer wants to pop up.
  14. Know the success of your or failures. thanks

NOTE: If you do not have a SDcard and are getting the sparse ERROR in it file explorer then you can buy a OTG flash drive like this one and load the FRPbypass.apk to it from your computer. once plugged in navigate to it in file explorer and install the frp bypass app that way. So you can put this address into your ES file explorer app  https://www.androidfilehost.com/?fid=24665542585483676

 

Alternative Samsung Frp bypass Method 

All of the latest FRP bypass methods and remove can be found at Phonlabtech.com. RootJunky has created this training course and you will find all of the best methods available in his training course. Watch the video below and you will see motoReaper a tool that rootjunky created for phonlabtech students to use on Motorola devices.

 

 

If you are looking for more FRP Bypass methods make sure you check out Phonlab. All of my latest research on FRP is going to be exclussively on Phonlab along with Samsung Reactivation lock bypass and so much more. Check it out !!!!

Quadrooter Qualcomm Exploit
R1 HD Amazon Bootloader unlock

Super Fans always leave a comment :-)

520 thoughts on “Universal Samsung FRP Bypass”

  1. I’m in RealTerm putting in the commands and I get an error that says. ie_NOpen – device not open. I double checked the port and I have the right number.

    Reply

  4. Hi RJ,
    Awesome, it worked for my S7. You have saved me from owning a very expensive brick :-).
    Few notes:
    – If RealTerm complains that the port is not open, make sure that the Open button on the Port tab is clicked (as a default after installation it is not clicked).
    -If after entering the first command, nothing happens, keep enter the command, until you have responses in yellow. I probably entered more than 10 times.

    Reply

    • I feel like I’ve sent the 1st command over 15 times but I don’t get anything in yellow.

      I’m not giving up 🙂

      Any other Ideas? I’ve tried severaly diff computers / cables / versions of RealTerm.

      I’m on a SPR S6 Edge+ w/ 6.0.1 FRP and Google locked

      Reply

  5. Thanks, working on SM-G531HUBU0APE2, just have to do a workaround bcause In contact section there’s not “scan business card” so I used SideSync4 to get access to chrome/samsungapps/es file explorer/ com.rootjunky.frpbypass-1.0.apk and voilà everything set up!

    Reply

  6. I just want to confirm that this trick also work on samsung galaxy s7 edge SM-G935F, Android security patch july 1 2016 i also did not bother to remove sim card the trick was little different and easier to get to browser and don’t try to download ES file explorer from google simply go to samsung app store and create account and download it from there also send rp file via email download don’t go try rootjunky site you will get parse error. thanks Rootjunky 🙂

    Reply

      • I am unable to parse error too. i have the Note 5 that does not have a SIM Card as suggested in your video. I am unable to find the parse error fix “at the bottom of this post”. Thanks.

        Reply

        • i got over the parse error.
          i feel that i am closer now.
          i got the following error: “Unfortunately, FRP BYPASS HAS STOPPED.
          So frustrated.
          Olivia

          Reply

          • Olivia i found the problem , you have to download > Google Account Manager 6.0.1. Then you can put it on your micro SD card. Instal first the Google account manager and then you can instal the bypass from Rootjunky. greating Richard

  9. Don’t keep sim in phone. Try it will work. Mine also work after too many tries. And try to call 911 instead of 1234 .in second command enter atd911;/r/n.

    Reply

  10. So everything works up until I get to the dialer. I’m on the galaxy s5 g900t3 and there’s no scan business card option and it wont send you to a website if you type it under any of the contact info sections. Any help? Thank you

    Reply

Leave a Comment

Loading Facebook Comments ...